Hey look, I’m alive again! This was a commission for a friend of mine. By the time I was done it weighed a total of 0.9 kg (2 lb) and was 142 cm (about 56 inches).   Started with a 1 inch square doweling, cut it in to three 21 cm.  ¼” holes was drill in to each open end to the deepest my dremel could manage with drill bits, including what would make up the top and bottom.  Then two iron rods were cut at just about double the depth of these holes.  The dremel has small cutting blades that very easily, and veryRead More →